HX-P-1501/HX-I-1208
1、特性：低密度，中低硬度。
Characteristic:Low density ，Medium to low hardness.
2、用途：用于聚醚大底的生产。
Applications:For polyether outsole.
3、原液特性：
Typicalproperties of PU resin:
|
品名 Name of products |
外观 Appearance |
粘度 Viscosity (mPa.s/40℃) |
密度 Density (g/cm3/40℃) |
包装 Package (kg) |
|
HX-P-1501 |
乳白色液体 Milk white liquid |
300-600 |
1.00-1.02 |
17(Net) 绿标签green label |
|
HX-I-1208 |
透明液体无异物 Transparent and pure liquid |
100-300 |
1.12-1.14 |
19(Net) 红标签red label |
4、催化剂与辅助剂 catalyst and adjuvant
|
催化剂/17kg catalyst/17kg |
水/17kg water/17kg |
硬化剂/17kg hardner/17kg |
|
根据需要添加280-350g Add 280-350g according to the reality |
根据需要添加50-70g Add 50-70g according to the reality |
根据需要添加0-300g Add 0-300g according to the reality |
5、原料预热 Materials preheat
|
HX-P-1501 |
HX-I-1208 |
催化剂C-3 |
|
50-60℃预热6-8小时 Preheated at 50-60℃ for 6-8 hours |
50-60℃预热6-8小时 Preheated at 50-60℃ for 6-8 hours |
无需加热 Without heating |
6、成型条件及反应参数 Typical processing parameters & Reaction parameter
|
项目 Items |
使用温度 Materials Temperatures |
混合比 Mix ratio (By weight) |
自由泡密度 Free rise foam density(g/cm3) |
成品密度 Product density(g/cm3) |
模具温度 Mold temperature(℃) |
脱模时间 Demold time(min) |
|
参数 |
32-35/38-40 |
100/98-100 |
0.25-0.35 |
0.50-0.70 |
50-55 |
5-6 |
7、制品物性值 Physical properties
|
项目 Items |
硬度 Hardness (AskerC) |
拉伸强度 Tensile strength (Mpa) |
伸长率 Elongation (%) |
撕裂强度 Tear strength （KN/m） |
耐折 Ross Flexing --90° （-40℃） |
NBS耐磨 （%） |
|
参数 |
70-85 |
5.0-7.0 |
400-500 |
≧10 |
5万次无裂口 50,000 times no crack |
/ |
n 以上数据仅作参考，具体数据以实际操作为准。如需其他物性指标，请与我公司联系。
Datalisted above are just for reference.The detail data are subjected to practicaloperation.If other requests for Physical properties,please contact us.
n 该物性数据是对10mm厚的试片测试获得的。成型品存在一定收缩比率，本品的收缩率在8-10‰，客户应根据实际情况设定使用。
These physical data are acquired by testinga sample of 10mm thick. Finished products have certain rate of shrinkage insize, and the rate is tested at about 8-10‰, customers should apply it according to factual situation.
HX-P-1801/HX-I-1362
1、特性：中密度，中硬度。
Characteristic:Low density ，Medium hardness.
2、用途：用于聚醚大底、凉鞋生产。
Applications:For polyether outsole、sandals
3、原液特性：
Typicalproperties of PU resin:
|
品名 Name of products |
外观 Appearance |
粘度 Viscosity (mPa.s/40℃) |
密度 Density (g/cm3/40℃) |
包装 Package (kg) |
|
HX-P-1801 |
乳白色液体 Milk white liquid |
400-700 |
1.00-1.02 |
17(Net) 绿标签green label |
|
HX-I-1362 |
透明液体无异物 Transparent and pure liquid |
50-200 |
1.12-1.14 |
19(Net) 红标签red label |
4、催化剂与辅助剂 catalyst and adjuvant
|
催化剂/17kg catalyst/17kg |
水/17kg water/17kg |
硬化剂/17kg hardner/17kg |
|
根据需要添加300-340g Add 300-340g according to the reality |
根据需要添加50-70g Add 50-70g according to the reality |
根据需要添加0-300g Add 0-300g according to the reality |
5、原料预热 Materials preheat
|
HX-P-1801 |
HX-I-1362 |
催化剂C-3 |
|
50-60℃预热6-8小时 Preheated at 50-60℃ for 6-8 hours |
50-60℃预热6-8小时 Preheated at 50-60℃ for 6-8 hours |
无需加热 Without heating |
6、成型条件及反应参数 Typical processing parameters & Reaction parameter
|
项目 Items |
使用温度 Materials Temperatures |
混合比 Mix ratio (By weight) |
自由泡密度 Free rise foam density(g/cm3) |
成品密度 Product density(g/cm3) |
模具温度 Mold temperature(℃) |
脱模时间 Demold time(min) |
|
参数 |
32-35/38-40 |
100/78-80 |
0.25-0.35 |
0.45-0.70 |
50-55 |
4-6 |
7、制品物性值 Physical properties
|
项目 Items |
硬度 Hardness (AskerA) |
拉伸强度 Tensile strength (Mpa) |
伸长率 Elongation (%) |
撕裂强度 Tear strength （KN/m） |
耐折 Ross Flexing （-30℃） |
DIN磨耗 DIN abrasion Mg/cm3 |
|
参数 |
50-65 |
5.0-7.0 |
400-500 |
≧6 |
5万次无裂口 50,000 times no crack |
≤250 |
n 以上数据仅作参考，具体数据以实际操作为准。如需其他物性指标，请与我公司联系。
Datalisted above are just for reference.The detail data are subjected to practicaloperation.If other requests for Physical properties,please contact us.
n 该物性数据是对10mm厚的试片测试获得的。成型品存在一定收缩比率，本品的收缩率在8-10‰，客户应根据实际情况设定使用。
These physical data are acquired by testinga sample of 10mm thick. Finished products have certain rate of shrinkage insize, and the rate is tested at about 8-10‰, customers should apply it according to factual situation.
INQUIRY THIS PRODUCT